How to clean a range hood filter thoroughly?
Release date:
2025-11-28
Today, the centennial editor will take you to learn about how to clean the range hood net in order to be clean. We hope it can bring some help to everyone!
1. Firstly, gently press down on the direction of the fuel tank slot, remove the fuel tank cover, and then use a Phillips screwdriver to remove the two fixing screws on the hood of the range hood.
2. Place the pumping unit mesh cover and oil receiving box into a large basin, add clean water, and fully immerse the mesh cover in water. After soaking for 15 minutes (if conditions permit, it is recommended to soak in warm water at around 50 ℃). The purpose is to soften hardened oil stains. Next, spray the oil fume clean onto the oil stains on the hood of the oil pump and the oil receiving box, do not put it in water, let it sit for another minute.
3. At this point, the hard oil stains have softened and the soft oil stains have liquefied. You can spray some oil fumes on the waste toothbrush to clean it. Due to the thick oil stains on the oil receiving box, it needs to continue softening. First, brush the mesh cover.
4. Reverse brushing method for range hood mesh cover: Use a waste toothbrush to brush the groove of the mesh cover in the direction indicated by the arrow. Try to avoid brushing against protruding sharp corners. So, both the four step shape and the diamond plane are the same.
5. There are no corners in front of the hood of the range hood, so there is no requirement for the direction of the brush, as long as it can be brushed. Even thick oil stains can be cleaned by repeatedly scrubbing them a few times.
6. The cleaning effect of the front and side of the hood of the range hood after cleaning.
7. Next, clean the oil receiving box. Brushing the oil receiving box is relatively simple, with only some gaps. Use a toothbrush to carefully brush and clean it. The cleaning effect of the fuel tank is as follows. Due to the very soft bristles of the toothbrush, the oil fume purification is gentle and will not cause damage to the hood and plastic suction box of the range hood. Make sure there are no scratches.
That's all for today's sharing. If you like it, remember to click on it at the end of the article to read!
WANT TO KNOW MORE ABOUT THE PRODUCT? GET INFORMATION NOW
For Many Customers To Provide A High Quality Of The Overall Solution And Complete Sets Of Products
Contact
Contact Person: Mr. Huang
Email: 22433810@qq.com
Address: Room 403-406, Building 25, Baoli Building Materials Market, No. 48-6, Youyi Road, Economic Development Zone, Jiangnan District, Nanning City
Official website
Powered by www.300.cn SEO